Location: Leesburg, FL 34748 | Price: $18,280
| Engine | MERCURY MARINE40ELPT 4S |
| Total Power | 40hp |
| Engine Hours | – |
| Class | – |
| Length | 13.5ft |
| Year | – |
| Model | 40ELPT 4S |
| Capacity | – |
Was $21330 Now $18280
The newest addition to the MAKO fleet boasts all the heritage, quality, and trusted performance of its larger siblings in a super shallow-drafting, easy-to-maneuver package. It features all the MAKO Pro Skiff DNA in our smallest package ever with a wide footprint that delivers a trio of advantages: A super stable casting platform, 8� draft, and maximized interior storage. Its size and slides easily onto sandbars and into marine slips and is the perfect starter boat for those just venturing out into saltwater. Topping this package off is reliable and economical Mercury FourStroke power that�s ready to take you across the skinniest flats.
Additional Specs
-
Length:13′ 6″
-
Beam: 6′ 0″
Bottom Width: 4′ 10.5″
Max. Recommended HP: 40 HP
Fuel Capacity: 6.6 gal.
Person Capacity: 4 persons Person Weight: 550 lbs. Person, Motor & Gear Weight: 900 lbs.Interior Depth: 15″
Transom Height At Center Line: 20″
Draft: 8″
Dry Weight: 845 lbs.
Average Hull Weight: 640 lbs.
Average Package Weight: 1490 lbs.
Package Height: 4′ 11.5″
Storage Length: 17′ 6″
Standard Features
Certification & Safety
-
Backed by MAKO� Assurance 5+Life�the best factory warranty in saltwater boats
NMMA� certified
Factory leak tested for hull, plumbing & fitting integrity
Horn
�
Console
-
Single-cable, no-feedback rotary steering
Multifunction tachometer/trim gauge
Panel-mounted control box w/power trim
Below-console storage area
2 drink holders
3 vertical flush-mounted console rod holders
�
Interior
-
Anchor locker
2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
360� fishability
Raised, integrated bow fishing platform
Raised, closed-molded aft platform
�
Performance
-
Award-winning Advanced Inverted V (AIV) hull design for superb load-carrying abilities & a smoother, drier ride in choppy waters
Integrated anti-spray hull design
Factory-matched propeller
�
Hardware
-
4 folding stainless steel cleats
Reboarding step & stainless steel grab handle
Stainless steel bow & stern eyes
�
Construction & Exterior
-
Color: MAKO� Bone White gelcoat
100% composite construction
Encapsulated, fiberglass-infused transom w/high-density composite core
Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
1-piece gelcoated fiberglass deck liner injected w/expanding closed-cell foam for flotation, added strength & a quiet ride
Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
Stipple texture to B-side of all fiberglass lids
Heavy-duty rub rail
�
Electrical, Mechanical & Plumbing System
-
700 GPH (2,649.79 LPH) bilge pump
Portable 6.6-gal. (24.98 L) fuel tank w/hold-down strap
USCG-compliant navigation lights
Interstate� cranking battery w/tray
Marine-grade rocker switches w/push button breaker protection
�
Trailer
-
Custom single-axle trailer
All-welded, tubular frame for a unitized structure w/exceptional strength-to-weight ratio
Hot-dipped galvanized construction
Hot-dipped galvanized wheels w/13″ (33.02 cm) radial tires
Super Lube hubs
Swing-up locking jack w/swivel wheel
Outboard motor support to reduce hull & transom stress while towing
4 carpeted bunks to protect hull
Transom tie-down straps
Safety chains�